• Pull and install large-gauge conductors (including overhead installations)
• Install, bend, and secure EMT, RMC, IMC, and other conduit systems
• Disconnect, label, document, and relocate control cables and associated wiring systems
• Maintain clean and organized job sites
• Work extended hours as required to meet project schedules
• Coordinate with project managers and other trades
• Perform tasks safely in elevated or physically demanding environments

• Minimum 3+ years of commercial or industrial electrical experience
• Proficiency bending conduit (hand and mechanical benders)
• Experience identifying, labeling, and relocating control wiring
• Working knowledge of NEC and job site safety standards
• Physically capable of lifting 50+ lbs and working extended hours

• Journeyman license (if required by state)
• OSHA 10 or OSHA 30 certification
• Experience with 480V 3-phase systems
• Experience in tenant improvements or equipment relocations

• Commercial and industrial job sites
• Overhead work and ladder/scissor lift use
• Extended shifts and overtime as needed
• Fast-paced construction environments

• Strong attention to detail
• High safety awareness
• Reliability and accountability
• Ability to meet deadlines

• Do you have experience with 480V 3-phase systems
• Do you have:

• As part of our hiring process, candidates must complete a 9-panel drug test (excluding THC) and a background check. Are you willing to proceed with these requirements?
• Are you willing to work 8-12 hours a day for 6-7 days a week
• Do you have:

• commercial or industrial electrical: 3 years (Required)

• OSHA 10 or OSHA 30 certification (Preferred)
• Journeyman license or Certificate (Preferred)

• Adapt standard tooling, mount cutting tools, set feeds and speeds, and make necessary adjustments.
• Perform heat treating, finishing, grinding, honing, brazing, and mechanical assembly operations as required.
• Provide work direction and assist with machine set-up for junior machinists.
• Troubleshoot and repair grinding equipment to support quality requirements and production demand.
• Train other employees in bearing component development, manufacturing, and assembly.
• Perform rework and repair single parts or complete assemblies

Minimum Required Skills and Knowledge

• 4 years of concentrated machinist training.
• Able to read and interpret engineering drawings.
• Demonstrated job planning abilities and knowledge of mathematics through trigonometry.
• Understands how to work with a variety of materials

Experience Level with Business Tools

• Proficient in utilizing business tools such as: E-mail, Microsoft Word, Excel, and PowerPoint.
• Experience with SAP or equivalent ERP product and productivity software desired.

Education and Experience

• 2-year certificate in Machining with emphasis on grinding.
• Desired 10+ years of hands-on grinding experience producing precision parts.
• Formal training and practical ability to convert tolerancing from manufacturing drawings to machine language.
• Proven ability to lead setup, documentation, process, and procedures for consistently producing x-ray bearings.

ENVIRONMENT AND PHYSICAL REQUIREMENTSEmployee must be able to meet the following requirements with or without an accommodation.

• Medium work that will occasionally require employee to lift/move up to 10 lbs. and occasionally lift more than 15 lbs. to greater than 20 lbs.
• Lifting, carrying, pushing, pulling, or moving heavy equipment and/or supplies occasionally.
• Reaching above and below the shoulder occasionally.
• Above-average agility and dexterity with the ability to hold, grasp and manipulate small parts and use hand and power tools constantly.
• Wear personal protective equipment (PPE) and handle physical exertion, such as long periods of standing, walking, bending, crouching, stretching, reaching, repetitive motion, or similar activities.
• Work environments includes: moving mechanical parts, repetitive hand motion.
• Travel to offsite training sites. Valid driver’s license. (if need on job profile)

Codes and tests software and writes documents at the direction of senior engineers, with mentoring, to develop control systems for industrial x-ray machines. Reads electrical schematics to guide software development. Languages include “C” and “C++”, and may include “C#”, Python, and other languages. Writes software to use Timers, GPIO, ADC, DAC, UART, SPI, TCP/IP.Develop high quality reliable and robust systems to meet and exceed requirements.

Job Description

SKILLS

• Embedded software development with “C” or “C++” on microcontrollers
• Ability to read electrical schematics for software engineering
• Microsoft Office (Outlook e-mail, Word, Excel, Power Point, Visio)
• Desired
• Software development on Microchip PIC32 and STMicroelectronics STM32
• PC software development with “C#”, WPF, or other software
• Pluses
• Web page, server, backend, and full stack development are a plus
• PLC ladder logic and HMI screen creation is a plus
• FPGA
• Xilinx Peta Linux
• Electrical design and PCB layout

EXPERIENCE

• 5+ years or greater of related experience

EDUCATION

• One or more of the following 4-year degrees:
• Bachelor of Science Computer Engineering (B.S.C.E)
• Bachelor of Science Electrical Engineering (B.S.E.E.)
• Bachelor of Science Computer Science (B.S.C.S.)

• Operate and maintain forging and press machines
• Work with heated metals and dies to produce precision aerospace parts
• Inspect parts using measuring tools to ensure accuracy and quality
• Assist with die setup, changeovers, and basic maintenance
• Follow all safety and production procedures
• Maintain a clean, organized, and safe work area

What We’re Looking For:

• Comfortable working in a hot manufacturing environment
• Previous experience in metal manufacturing, forging, or machining is a plus
• Strong mechanical aptitude and attention to detail
• Ability to lift up to 50 lbs
• Reliable transportation and good attendance
• Must pass a 7-year background check and drug screen

Why You’ll Love Working Here:

• Temp-to-hire position – not seasonal work
• Daily lunch provided by the client
• Paid holidays while on assignment
• Excellent benefits once hired permanently
• Opportunity for long-term growth in aerospace manufacturing

• Design control panels, schematics, and select automation components
• Develop, test, and troubleshoot PLC programs (Allen-Bradley, Schneider, or equivalent)
• Configure VFDs, motor controllers, encoders, sensors, and conveyor motion systems
• Conduct FAT/SAT testing, commissioning, and operator/maintenance training

Qualifications:

• Proven PLC programming experience in conveyor or material-handling systems
• Knowledge of food-industry standards and washdown environments
• Skilled in electrical schematics and hands-on system troubleshooting

Why Join Us?

• Work on cutting-edge food automation projects
• Collaborate with a dynamic team of engineers and technicians
• Make a direct impact on safe, efficient production systems

• Interfacing devices such as thermocouples, RTD's, pressure transducers, load cells, photoelectric devices
• Reading and interpreting electronic, electrical, and pneumatic blueprints and specs
• Working with variable voltage DC control systems, solid state controllers, M-G sets and rectifiers.
• Servicing adjustable speed equipment such as magnetic amplifiers, SCR's, and control systems involving microprocessor and programmable controllers.
• Experience with Allen Bradley equipment

• Primary function of this position is to lay out, assemble, install & maintain pipe systems, pipe supports & related hydraulic & pneumatic equipment for steam, hot water, heating, cooling, lubricating, sprinkling, & industrial production and processing systems as required for new construction or maintenance, applying knowledge of system operation and following blueprints.
•  
• Will receive instructions, blue prints & work orders for the job. Will set up working procedures & calculate dimensions and material requirements for piping. 
•  
• Plans & schedules machinery installation and repairs to avoid interfering with plant production. 
•  
• Follow lock out tag out procedures. 
•  
• Set up & operate various pipe cutting, bending & threading machinery. 
•  
• Install various types insulation & pipe coverings; removes and disposes of old coverings in line with the company hazardous waste procedures and EPA & OSHA requirements. 
•  
• Makes hydraulic pressure test of piping installations. 
•  
• Checks & adjusts controls, gauges, & valves. Inspects & maintains facility piping systems, heating, refrigeration, & air conditioning systems, water treatment & sewer systems and burners and heaters. 
•  
• Keeps up-to-date records of piping systems and controls in company layout manual. 
•  
• Posts records of safety checks and inspection dates of assigned equipment. Will perform other duties as assigned.

Qualifications:
 

• Must be able to read blueprints & piping schematics.
• Must have welding experience.

Education: 
  High School Diploma and or general education (GED); and/or equivalent combination of education, training, and experience that performs the essential functions of this position. 4-5 years’ apprenticeship that includes on-the-job training.  

• The major function of this position is to provide mechanical work, maintenance, rebuild services, and on-going repairs to the various machines in the plant. Manufactures or fabricates parts, fits keys, lays out centerlines & assemblies per drawings, sketches, specs and written or verbal instructions.
•  
• Makes file-fits, drills, taps and reams holes, fits bearings, aligns bed plates, housings, rolls, line shafts, gears, couplings, etc. using levels, scales dial indicators, feeler gauges, plumb bobs, radius gauges, etc.
•  
• Dismantles equipment to remove defective parts, either functional or structural, and examines parts to determine cause of failure.
•  
• Adjusts functional parts and replaces defective parts of machines and devices. 
•  
• Knowledge of tolerances for minimum/maximum clearance, interference fits, etc. 
•  
• Installs, relocates and removes machinery using hoists, cranes, beams, scaffolds, blocking, trucks, jacks, chain bocks, etc. after determining the best and safest method of shifting, positioning, lifting and transporting. 
•  
• Knowledge & use of welding equipment, both electrical and gas. Knowledge & use of gas burning torch equipment.
•  
•  Knowledge use of all craft power tools such as pedestals or bench grinders, saws, drill presses, etc.
•  
• Knowledge of and capable of repairing powerhouse machinery such as boilers, compressors, and all auxiliary equipment.
•  
•  Must be able to read & interpret piping layout and control schematic drawings for the machines and systems.

 
Qualifications: 

• High School Diploma and or general education (GED); and/or equivalent combination of education, training, and experience that performs the essential functions of this position.
•  
• Must be thoroughly proficient in mechanical skills. 
•  
• Must be able to weld ferrous and non-ferrous metals.
•  
• 3-5 years’ of Millwright experience preferred.

• will work on the computers and cockpit instruments
• Checking for defects like loose connections and frayed wires
• Using test equipment to determine performance and airworthiness
• Replacing or repairing malfunctioning components
• Mounting equipment, connecting wiring, and configuring settings
• Ensuring proper alignment and calibration of installed or repaired equipment
• Maintaining records of maintenance and repair work
• Providing ground operation support for flight tests
• Coordinating work with engineers, technicians, and other aircraft maintenance personnel

Requirements

• Proven experience as an Avionics Technician or similar role within the aviation industry.
• Strong knowledge of electrical systems, including the use of ammeters and other diagnostic tools.
• Familiarity with airframe structures and their integration with avionics systems.
• Proficiency in using power tools safely and effectively for installation and repairs.
• Ability to perform root cause analysis to troubleshoot complex issues effectively.
• Strong attention to detail, problem-solving skills, and ability to work independently or as part of a team.
• Relevant certifications or licenses in avionics or related fields are a plus.

Join our team as an Avionics Technician where your expertise will contribute to the safety and efficiency of aviation technology!

• Perform complex setups from programs on machines to ensure that completed parts conform to print and process specifications.
• Determine program edits required to adjust speeds and feeds in order to machine parts properly and efficiently.
• Accurately inspect finished parts using microscopes, tool maker's scope, micrometers, OGP, gage pins, thread gages, indicators, calipers or other equipment.
• Adjust machine off-sets to achieve required tolerances.
• Maintain adherence to production schedules and ensure quality inspections are completed in accordance with established procedures, resulting in a limited amount of Non-conforming Material Reports (NMR).
• Assigned work area, tools and gauges will be clean, and kept neat, safe and orderly at all times.
• Performs routine maintenance.
• Maintain a positive work atmosphere by communicating in a manner that interfaces well with customers, co-workers, and management members.
• Continually monitor manufacturing methods, processes and procedures to ensure departmental goals are met while maintaining or improving cost competitiveness, which includes identifying, recommending, and implementing necessary improvements.
• Follow and continually monitor established safety procedures to assure a clean and safe work environment is promoted and maintained.
• Uses basic statistical concepts on a regular basis.
• Assumes other projects and responsibilities as directed.

Requirements

• Proven experience as a CNC Machinist or similar role.
• Diploma in Computer Integrated Machining, or currently enrolled in a program.
• 1-3 years’ experience in a similar manufacturing environment, or equivalent combination of education and experience.
• Must be a US Citizen or Permanent Resident.

The Maintenance Technician is responsible for overseeing and managing maintenance operations within the company's manufacturing and production facilities. This role involves leveraging experience to develop strategies and programs aimed at enhancing the longevity, reliability, and safety of machinery and equipment while reducing costly breakdowns.

Key Responsibilities:

• Lead the installation and commissioning of new equipment, ensuring efficient maintenance processes are integrated from the start.
• Plan and prioritize preventative maintenance and repair schedules for manufacturing and production equipment.
• Analyze equipment malfunctions and implement preventative measures to minimize future breakdowns.
• Provide technical guidance and safety training to staff, including advice on necessary safety improvements.
• Oversee the management of maintenance supplies, ensuring inventory accuracy and evaluating supply vendors for quality and cost-effectiveness.
• Handle maintenance of electrical systems, lighting, heating, and air conditioning, coordinating with in-house personnel or external contractors when needed.
• Ensure the proper upkeep and service of vehicles and forklifts, maintaining service records and coordinating with internal or external service providers.
• Maintain up-to-date maintenance records for all production and support equipment.
• Coordinate the safe storage and disposal of hazardous waste materials.
• Perform additional duties as required by the business.

Qualifications:

• Strong verbal and written communication skills in English.
• At least 2 years of experience in manufacturing or production maintenance, including safety management.
• Familiarity with plastics and sheet metal machinery and equipment.
• Knowledge of basic electrical systems, including wiring, nodes, and conduits.
• Understanding of OSHA safety regulations, requirements, and inspection processes.
• Ability to read and interpret machine manuals, electrical diagrams, and troubleshoot equipment as needed.

Compensation and Benefits:

• Comprehensive medical insurance coverage.
• Paid vacation, sick leave, and recognized holidays.
• Competitive hourly wage based on experience.
• Regular work schedule: Monday to Friday.

• Pick and pack aerosol products efficiently and accurately.
• Label boxes and products according to company specifications.
• Prepare products for shipment by properly boxing and sealing them.
• Ensure all items are handled with care and meet quality standards.
• Maintain a clean and organized work area.
• Assist with other general warehouse duties as needed.

Qualifications:

• Strong attention to detail and accuracy.
• Ability to work independently and as part of a team.
• Reliable and punctual with a strong work ethic.
• Must be able to lift up to 20lbs and stand for 8 hours.
• Prior warehouse experience is a plus, but not required.

Additional Information:

• This position is located on a bus route for easy access.
• Full-time, Monday to Friday, 8:00 AM to 5:00 PM.
• $15/hr.
• This job is projected to start within the next couple of weeks.

If you’re looking for a stable, full-time job with opportunities for growth, apply today! We look forward to hearing from you.
How to Apply: Please submit your resume or contact STS Staffing for more details.

#Reno#evergreenReno

• Warehouse- Pick/Pack, Reach Truck, Material Handlers, Machine Operator, Forklift, ect. 
• Medical - Medical Assistant, Medical Front Office, Medical Records, ect. 
• Schools (Truckee, CA)- Janitorial Staff and Cafeteria Staff 
• Event Staff- Concerts, Comedy Shows, Sporting, Graduations, ect.
• Clerical - Administrative Assistant, Front Desk, Accounting, HR, Customer Service, ect 

Please feel free to apply and call our office at (775) 852-2555 to check our job availability! 
#Renoevergreen#Evergreenreno